Damascus steel handmade knife by Bill Wiggins

Damascus steel and fossil mammoth ivory knife made by Bill Wiggins of Haywood County, North Carolina.

Advertisements

A poor rhyme

 

Knife makers struggle and yearn for the P

P as in publicity

There’s a maker that wants to be unknown

Signing his work just makes him groan

A strange duck is he, seeming to want anonymity

 

Advice is futile, especially from you

He has his cake and he eats it too

He makes ‘em big, he makes ‘em little

But ask him to sign, and he’s non-committal

To tell it true…he makes what he wants, that’s all he’ll do

 

It’s odd that he won’t sign his work

I suppose it’s some sort of quirk

So back in the woods, in a shop on a hill

There’s a knife maker that does what he will

I’ll quit now and not be a jerk, just in case he should go berserk

 

 

Below are two unsigned knives by the unknown knife maker. The sheaths are by Bob Wiggins who does sign his work on the back, although in VERY small letters.

 

ABS Mastersmith Dan Warren pocket knives

Two slip joint pocketknives by Dan Warren, American Bladesmith Society Mastersmith. The handle scales are mammoth ivory and the larger knife is just over 7 ¼” overall when open.

Small custom folding knife by Dan Warren ABS Mastersmith

Small custom folding knife by Dan Warren ABS Mastersmith

warrenfolder-1703-blogjpg

A new custom pocket knife

 

 

DSC_9317 blog pic

Mother of pearl handled Daddy Barlow by American Bladesmith Society Journeyman Smith Mike Christenson. This is a big folder, 8 ¾ inches open and 5 inches closed. The flat ground blade is made from 154 CM and is .091 thick at the ricasso. Workmanship is excellent; the blade has a half stop, and is perfectly centered when closed. The bolsters are cut at a 45 degree angle for a matching bevel on the handle scales to fit under. The knife weighs 5.4 ounces. Mike is a friend of mine and lives in the same mountainous area of North Carolina that I do.